Installing With The Threaded Rod Adapter - Optional Accessory - Electro-Voice EVID-P6.2B Installation Manual

10 en | Installation
3.1 Installing with the threaded rod adapter – optional accessory
Using a threaded rod
Notice!
Use a steel threaded rod size 7/16"-20.
To install using a threaded rod, do the following:
1.
2.
3.
4.
5.
2018.09 | 03 | F.01U.358.439
Mount threaded rod (not included) to ceiling.
We highly suggest double nutting the threaded rod, whenever possible.
Screw jam-nut (not included) on the speaker end of the threaded rod on.
Leave enough space to screw the adapter.
Screw adapter into threaded rod at least 3/4".
Align mounting slot, if needed.
Screw jam-nut down until it contacts the surface of the threaded rod adapter.
Fully tighten against each other.
Insert pendant mounting plate into threaded rod mounting slot.
Installation manual
EVID Pendant Speaker
Electro-Voice