Electro-Voice EVID-P6.2B Installation Manual page 9

EVID Pendant Speaker
5.
6.
7.
8.
9.
See also
–
–
Electro-Voice
Once the proper height adjustment has been made, put the cable tail through the
through hole of the coupler, and leave at least 3 cm (1in.) (A) of length.
Tighten the screw to secure the cable.
Support the speaker, snap the support hanger onto the suspension tab (center) located
on the top of the speaker.
Attach a secondary auxiliary support cable (not included) onto one of the suspension
tab side holes in the top of the speaker.
Secure the secondary auxiliary support cable (not included) to a different ceiling
support point of the building structure.
Safety, page 4
Wiring, page 13
3 cm
length
(A)
Installation manual
Installation | en 9
2018.09 | 03 | F.01U.358.439