Table of Contents
Advertisement
8012 Trotec Speedmarker CL
SAFETY
2.2 Laser Safety Information
To assess the potential dangers laser systems pose, they are classified into
5 safety classes: 1, 2, 3a, 3b and 4. Speedy 300 is a device of class 4 (USA:
Class IV). The safety is to be guaranteed through the Integrator.
This laser engraving system contains a Class 4 carbon dioxide (CO 2 ) laser
that emits intensive and invisible laser radiation. Without protective gear,
direct radiation, diffusely reflected radiation, or even stray radiation could be
dangerous!
Anyone who is exposed to laser radiation without protective gear is subjected
to the following risks:
Eyes:
Skin:
Clothing:
For this reason, never attempt to dismantle or rebuild the laser under any
circumstances, and do not attempt to operate a system that has been
dismantled or rebuilt!
If any operating or calibration devices other than the ones specified
here are used, or any other procedural methods are followed,
dangerous exposure to radiation could occur.
Service technicians are required to wear standard laser-safety goggles for
CO
lasers (wavelength 10.6 µm).
2
14/10/2015
Burns to the cornea
Burns
Danger of fire
Trotec Laser GmbH
12 / 19
Advertisement
Table of Contents
