Sleep Apnea Therapy User Manual
•
The device should be used only with masks and connectors recommended by Somnetics or with those
recommended by the health care professional or respiratory therapist. A mask should not be used unless
the device is turned on and operating properly. The exhalation port(s) associated with the mask should
never be blocked. Explanation of the Warning: The device is intended to be used with special masks or
connectors that have exhalation ports to allow continuous flow of air out of the mask. When the device is
turned on and functioning properly, new air from the device flushes the exhaled air out through the mask
exhalation port. However, when the device is not operating, enough fresh air will not be provided through
the mask, and exhaled air may be rebreathed. Rebreathing of exhaled air for longer than several minutes
can in some circumstances lead to suffocation.
Cautions
•
Federal law (United States) restricts this device to sale by or on the order of a physician.
•
Power the CPAP system only from the Somnetics-supplied power supply, mobile power adaptor, or
batteries. See
Appendix: Part
•
Use only interface devices approved by Somnetics for use with the Transcend Sleep Apnea Therapy
System to be assured of proper leak flow rates. You may find a list at http://www.mytranscend.com/.
•
Discontinue use of the CPAP device and contact your physician if respiratory or skin irritations occur.
•
Do not introduce liquids or objects into the CPAP device's air inlet/outlet connector.
•
Inspect the power cord for signs of wear or damage before each use. Replace the power cord if necessary.
•
Somnetics recommends replacing the output hose every three months of use.
•
To protect the environment, some parts and accessories of the CPAP system must be disposed of in
accordance with local regulations.
•
Use only those accessories provided or recommended by Somnetics
•
Dispose of batteries properly.
numbers.
Page 3
Introduction
Need help?
Do you have a question about the Transcend and is the answer not in the manual?
Questions and answers