Replacing The Air Inlet Filter - Somnetics Transcend User Manual

Sleep Apnea Therapy User Manual

Replacing the air inlet filter

Transcend's air inlet filter should be replaced every six months.
1.
Remove the pad from the bottom of the CPAP.
2.
Remove the filter plate by gently squeezing the tab at the back of the plate towards the front of the CPAP
and pulling the plate away from the CPAP.
3.
To replace the new filter plate, lay it on the CPAP with the front clips being put into place first. Once the
front is in place you can snap in the back clip. Make sure the filter plate is completely connected and
discard the used bottom plate.
4.
Reattach the pad to the CPAP.
Page 37
Replacing disposable parts