Assembling The Transcend Cpap System; Assembling The Transcend Sleep Apnea Therapy Starter System - Somnetics Transcend User Manual

Page 14
Assembling the Transcend CPAP
System
The interface connects to the CPAP via the air supply tube. The CPAP has a port that the air supply tube attaches
to; the other end of the tube attaches to a mating fitting on the interface. It is important that the pressure sensor
line is connected properly to the pressure sensor ports on the CPAP and the interface. The procedures for
connecting the Transcend CPAP system depend on which package you purchase. This section presents the
following topics:
•
Assembling the Transcend
•
Assembling the Transcend H6B Waterless Humidification System
•
Assembling the Transcend H9M Waterless Humidification System
Assembling the Transcend Sleep Apnea
Therapy Starter System
Follow these steps to assemble the Transcend Sleep Apnea Therapy Starter System:
1. Attach the universal hose adaptor to the 6-foot
hose.
2. Then attach the universal hose adaptor to the
CPAP.
3. Attach the interface to the other end of the
hose.
4. Plug the power supply into the CPAP.
5.
Connect power supply to a power source.

Assembling the Transcend CPAP System

(page 14)
Sleep Apnea Therapy User Manual
(page 15)
(page 18)