Installation - Toyota Avalon GSX30 Series Manual

BP-2

INSTALLATION

D Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension
diagram. (See the body dimension diagram)
D Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the
finish.
D After welding, apply the polyurethane foam to the corresponding parts.
D After welding, apply body sealer and under-coating to the corresponding parts.
D After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.
POINT
1 Inspect the fitting of the headlight, front fender and hood, etc., before welding, since this affects the appear-
ance of the finish.
PART NAME
[A] Radiator Support Apron Brace
BODY PANEL REPLACEMENT
F22068