Toyota Avalon GSX30 Series Manual page 103

HINT:
1) Prior to applying body sealer, clean the area with a rag soaked in silicone remover.
2) If weld-through primer was used, first wipe off any excess and coat with anti-corrosion primer before applying
body sealer.
3) Wipe off excess body sealer with a rag soaked in silicone remover.
4) If body sealer is damaged by peeling, cracks, etc., be sure to repair as necessary.
Flat Finishing
1. ENGINE COMPARTMENT
PAINT
BODY PANEL SEALING AREAS
D COATING
No Flat Finishing
PC-1
F22051