Toyota Avalon GSX30 Series Manual page 91

INSTALLATION
D Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension
diagram. (See the body dimension diagram)
D Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the
finish.
D After welding, apply the polyurethane foam to the corresponding parts.
D After welding, apply body sealer and under-coating to the corresponding parts.
D After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.
[LH only]
PART NAME
[A] Rear Floor Pan No.2 Reinforcement
BODY PANEL REPLACEMENT BP-69
F22135