2. SPECIFICATIONS
2.3 PAPER (LABEL) SPECIFICATIONS
Item
Span of one label
Label length
Width including backing paper
Label width
Gap length
Black mark length
Effective print width
Effective print length
Print speed up/slow down area
Outer roll diameter
Thickness (Backing paper + label)
Thickness of backing paper
2.4 RIBBON SPECIFICATIONS
Type
Width
Length
Outer diameter
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper
and ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE
PAPER AND RIBBON.
2.5 OPTION
Option Name
Cutter module
Strip module
Keyboard module
NOTE:
To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC represen-
tative or TOSHIBA TEC Head Quarter.
Label dispensing mode
Spool type
60 mm ~ 110 mm
(270 m)
Ø65 mm (max.)
Type
B-7204-QM
B-7904-H-QM
KB-80-QM
Batch mode
Strip mode
7.0 ~ 999.0
25.4 ~ 999.0
5.0 ~ 997.0
23.4 ~ 997.0
25.4 ~ 110.0
20.0 ~ 107.0
2.0 ~ 20.0
2.0 ~ 20.0
2.0 ~ 10.0
10.0 ~ 103.6
3.0 ~ 200.0
21.4 ~ 200.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.1 ~ 0.17
0.13 ~ 0.17
A stop-and-cut rotary cutter
This module strips the label from the backing paper with
the take-up block and strip block.
This module is an external intelligent keyboard unit.
2-2
2.3 PAPER (LABEL) SPECIFICATIONS
[Unit: mm]
Cut mode
37.0 ~ 999.0
31.0 ~ 993.0
6.0 ~ 20.0
29.0 ~ 200.0
1.0
0.1 ~ 0.17
0.056 ~
Description
EO1-33019