Table Of Contents - Husqvarna 115H Operator's Manual

1 Introduction
1.1 Introduction.................................................3
1.2 Product overview........................................4
1.3 Symbols on the product..............................5
1.4 Symbols on the display.............................. 5
1.5 Symbols on the battery...............................5
1.6 Menu structure overview............................ 7
1.7 Display........................................................8
1.8 Keypad ...................................................... 8
2 Safety
2.1 Safety definitions........................................ 9
2.2 General safety instructions.........................9
2.3 Safety instructions for operation...............11
3 Installation
3.1 Introduction - Installation.......................... 14
3.2 Before the installation of the wires........... 14
3.3 Before the installation of the product........14
3.4 Installation of the product......................... 18
3.5 To put the wire into position with stakes...19
3.6 To bury the boundary wire or the
guide wire....................................................... 19
3.7 To change the position of the
boundary wire or the guide wire..................... 19
3.8 To extend the boundary wire or the
guide wire....................................................... 19
3.9 After the installation of the product...........20
3.10 To do the product settings......................20
4 Operation
4.1 The ON/OFF button..................................26
4.2 To start the product.................................. 26
4.3 Operating modes......................................26
4.4 Stop.......................................................... 27
4.5 Switch off..................................................27
4.6 To charge the battery............................... 28
4.7 Adjust the cutting height........................... 28
5 Maintenance
5.1 Introduction - maintenance.......................29
5.2 Clean the product..................................... 29
5.3 Replace the blades...................................30
5.4 Software update....................................... 30
5.5 Battery...................................................... 31
5.6 Winter service...........................................32
6 Troubleshooting
2
Contents
6.1 Introduction - troubleshooting...................33
6.2 Fault messages........................................ 34
6.3 Information messages.............................. 38
6.4 Indicator lamp in the charging station.......39
6.5 Symptoms................................................ 40
6.6 Find breaks in the loop wire..................... 41
7 Transportation, storage and disposal
7.1 Transportation.......................................... 44
7.2 Storage.....................................................44
7.3 Disposal....................................................44
8 Technical data
8.1 Technical data.......................................... 45
9 Warranty
9.1 Guarantee terms...................................... 47
10 Applicable to US/CA market
10.1 Supplier's Declaration of Conformity...... 48
10.2 Compliance requirements...................... 48
982 - 001 - 12.12.2018