Applicable To Us/Ca Market; Supplier's Declaration Of Conformity; Compliance Requirements - Husqvarna 115H Operator's Manual

10.1 Supplier's Declaration of
Conformity
Issuer: Husqvarna AB, Drottninggatan 2, S-561
82 Huskvarna, Sweden
www.husqvarnagroup.com.
Responsible party: Husqvarna Professional
Products, Inc. 9335 Harris Corners Parkway
Suite 500 Charlotte, NC 28269 United States
U.S. Contact information: James McNew,
Manager Product Compliance, Telephone: +1
704 597 5000.

10.2 Compliance requirements

FCC ID: ZASHQ-BLE-1A (the Bluetooth
module).
®
The Bluetooth module is located on the
HMIboard (PCBA) in the upper chassis. It must
only be accessed by an authorized service
technician.
The device complies with part 15 of the FCC
Rules. Operation is subjected to the following 2
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
WARNING: To comply with RF
exposure requirements, please
maintain a separation distance of at
least 20 cm/ 7 inches from any part of
the product.
Models with a hatch: The supplied label shall be
attached to the product according to figure below.

48 - Applicable to US/CA market

10 Applicable to US/CA market
®
This device contains the module
FCC ID: XXX1YYYY2ZZZ
Models without a hatch: The supplied label
shall be attached to the product according to
figure below
This device contains the module
FCC ID: XXX1YYYY2ZZZ
Note: Changes or modifications made to this
equipment not expressly approved by Husqvarna
may void the FCC authorization to operate this
equipment.
Note: This device complies with Part 15 of the
FCC Rules [and with Industry Canada
licenceexempt RSS standard(s)]. Operation is
subject to the following two conditions: this
device may not cause harmful interference, and
this device must accept any interference
received, including interference that may cause
undesired operation.
982 - 001 - 12.12.2018