Table Of Contents - Esu 51801 Instruction Manual

Contents
1. Declaration of conformity ....................................... 3
2. WEEE delaration ....................................................... 4
3. Important notes - Please read this chapter first .. 4
4. How this manual will help you ............................... 5
5. Introduction - The SwitchPilot family .................... 5
5.1. Members of the SwitchPilot family ................................5
5.1.1. SwitchPilot overview ..................................................5
5.1.2. SwitchPilot V2.0 .........................................................5
5.1.3. SwitchPilot Extension .................................................6
5.2. Features .......................................................................6
5.2.1. Operational modes ....................................................6
5.2.1.1. k83 mode ...............................................................6
5.2.1.2. k84 mode ...............................................................6
5.2.1.3.User mode ..............................................................6
5.2.2. Transistor outputs ......................................................6
5.2.3. Servo outputs ............................................................7
5.2.3.1. Conventional servos ................................................7
5.2.3.2. Digital servos ..........................................................8
5.2.3.3. ESU servo motor .....................................................8
5.2.4. Feedback inputs .........................................................8
6. Connection to the digital system ........................... 8
6.1. Connecting elements of the SwitchPilot ........................8
6.2. Power supply from the digital system ............................9
6.3. Separate power supply.................................................9
6.4. Wiring of transistor outputs ........................................10
6.4.1. Connecting double-coil solenoids ............................10
6.4.2. Wiring daylight signals and light bulbs or LEDs ........10
6.5. Wiring a servo.............................................................11
6.6. Wiring feedback contacts ...........................................11
6.6. Wiring the SwitchPilot Extension .................................12
6.6.1. Relay outputs ...........................................................12
2
6.6.2. Wiring a motor drive ................................................12
6.6.3. LGB® motor drive ....................................................13
6.6.4. Polarizing electric frogs ...........................................13
7. Decoder settings (programming) ......................... 14
7.1. Changeable decoder settings ......................................14
7.1.1. Configuration Variables (CV) ....................................14
7.1.1.1. Standardization regarding NMRA .........................14
7.1.1.2. Bits und Bytes .......................................................14
7.2. Programming with DCC systems .................................15
7.2.1. Programming on the programming track .................15
7.2.1.2. Connecting to the programming track ..................15
7.2.2. Programming on the main track .............................16
7.3. Programming with Märklin® central stations .............16
7.4. Programming with the ESU LokProgrammer ...............16
8. Address settings ..................................................... 17
8.1. Turnout numbers .......................................................17
8.2. Decoder address .........................................................17
8.2.1. Schedule of turnout numbers and addresses ............17
8.3. Factory settings ..........................................................20
8.4. Programming addresses with programming button .....20
8.4.1. First address for outputs 1 - 4 ................................20
8.4.2. Second address for outputs 5 - 6 .............................20
9. Parameters of the transistor outputs ................... 20
9.1. Configuration of output with variable duration (k83) ..20
9.2. Output configuration to pulsed output.......................................21
9.3. Configuration of an output for PECO solenoid drives ..21
9.4. Configuration for continuous operation (k84) .............21
9.5. Configuring the „zoom"-effect ..................................21
10. Features of servo outputs ................................... 21
10.1. Configuration of servo end position „A" ..................21
10.2. Configuration of servo end position „B" ...................21
10.3. Configuration of servo speed ....................................21
10.4. Disabling the pulse signal and power supply .............22