Connecting The V X 610 External Antenna; Installation - VeriFone Omni 5 series Installation Manual

T S
ERMINAL ETUP
x
Connecting the V 610 External Antenna
Connecting the
x
V 610 External
Antenna
NOTE
CAUTION

Installation

40
O 5 V X 5
MNI XXX AND
VeriFone provides an external wireless antenna for some V
connection allows communication with your service provider to upload transaction
data from the terminal and download system upgrades to the terminal. Radio
service is activated by your service provider.
x
Some V 610 terminals have an internal antenna and this section can be ignored.
Use only the antenna designed for your unit. Failure to use the proper antenna
results in the inability to establish a wireless connection.
Never hold the unit by the antenna; doing so may break the connection and void
your warranty.
This section only discusses V
arrives from manufacture with the antenna unattached, use the following
procedure to install the antenna:
1
Locate the antenna port on the back side of the V
2
Align the connector on the end of the antenna with the connector on the end of
the terminal.
3
Push gently on the center of the base of the antenna until it slides into
position.
Figure 42 Align Antenna with Antenna Port
/V X 610 I G
XX NSTALLATION UIDE
x
610 terminals with external antenna. If the V
x
610 terminals. This
x
610
x
610 terminal.