VeriFone Omni 5 series Installation Manual page 29

Figure 22
1
Route the cable through cable retainer where provided to secure the power
cord.
NOTE The bottom of the V
feature to secure the power cord to the terminal. The battery-based V
not need this feature.
2
Insert the AC power cord into the power pack.
3
Plug the AC power cord into a wall outlet or powered surge protector.
Do not plug the power pack into an outdoor outlet or operate the terminal
WARNING
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
VeriFone recommends connecting wall power in the following order:
NOTE
1
First, connect the terminal to the power supply.
2
Next, connect the power supply to the power cord.
3
And last, connect the power cord to the wall outlet.
When the terminal has power, the terminal lights are activated and the green LED
indicator remains lit.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
VeriFone copyright screen.
x
V 610 Power Pack Connection
x x
510 and V 570 terminals have an integrated cable-retaining
DOWNLOAD NEEDED
Connecting the Terminal Power Pack
appears on screen after the initial
O 5 V 5 /V 610 I
X X
MNI XXX AND XX
T S
ERMINAL ETUP
x
610 does
29
G
NSTALLATION UIDE