Using The V X 610 Power Cradle - VeriFone Omni 5 series Installation Manual

T S
ERMINAL ETUP
x
Using the V 610 Power Cradle
x
Using the V 610
Power Cradle
To Connect the Power
Cradle
36
O 5 V X 5
MNI XXX AND
The power cradle serves both as a docking station and a battery charger for the
x
V 610 terminal.
1
Turn the cradle upside down and then insert round barrel connector into the
power port. Route the cable through the cable retainer where provided to
secure the power cord.
Figure 33 V
2
Insert the AC power cord into the power pack and then plug the AC power
cord into a wall outlet or power surge protector. The LED lits up to indicate that
it is ready for charging.
Figure 34 V
3
Remove the protector, identified by the icon at right. Attach the
charging strap and then install the screw on the bottom of the power
cradle to secure the strap.
Figure 35 V
/V X 610 I G
XX NSTALLATION UIDE
x
610 Power Cradle Connection
x
610 Power Cradle Connection
x
610 Power Cradle Connection