Technical Parameters; Using The Machine; Iii. Technical Parameters - Sefa Initium iCAP 2 Instruction Manual

III. Technical Parameters

Model No.
Machine Dimension
Heating Elements Size
Printable Articles Max Size
Voltage
Power
Recommend Setting
Time Range
Maximum Temp
Packing Size
Gross Weight
IV. USING THE MACHINE
iCAP 2/iLOGO press was designed for the application of transfers of all grades.
This equipment has been tested in our workshops to get a one year warranty against manufacturing
defects.
Power settings, mechanical and pneumatic submitted by our technicians in the workshop as well as the
security established on the machine should never be changed. Otherwise, INITIUM company will deny
all responsibility on potential problems associated with said machine.
Before starting any pressing operation, it is recommended that you read the safety instructions and the
instructions for use.
The press should be used by an authorized person and having been informed of the risks that may be
caused by improper use of the equipment.
iCAP 2 / iLOGO
380*360*340mm
one normal cap heater & one 15x 20cm heat platen
150 x 80mm&150 x 20mm
220V/1Phase
0.5KW for cap press; 0.6KW for heat platen
180~190C°; 30~40s.
0~999s
225 C°
48*32*39cm
19.5kg
Page 5
V0414