Configuring Network Settings - Ricoh SP 313SFNW V Setup Manual

Connecting the Computer and Machine
Connect the network cable to the Ethernet port.
Plug the other end of the cable into a network device, such as a hub.

Configuring Network Settings

Network connection methods vary depending on the network environment and the machine type. Select the method from among the
following that is most appropriate for your network environment, and then see the section for your machine type.
IPv4
Automatic Configuration (DHCP Enabled)
• A router with DHCP functionality or a DHCP server is required.
Connect the printer to the router or the hub using the Ethernet cable.
Turn on the printer.
Press the [ ] key.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [OK] key.
DPH03
cvw104
3