Ricoh SP 313SFNW V Setup Manual page 18

Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
Press the [ ] or [ ] key to select [Wi-Fi], and then press the [OK] key.
Press the [ ] or [ ] key to select [WPS], and then press the [OK] key.
Press the [ ] or [ ] key to select [PBC], and then press the [OK] key.
Press [Yes].
"Please push the [AP] within  minutes" appears, and the machine starts to connect in PBC method.
Press the WPS button on the access point within two minutes.
• For details about how to use the WPS button, refer to the manuals for the wireless LAN router and access point.
• The name of the button may vary depending on the device you are using.
Check the result.
Connection has succeeded:

Press the [EXIT] key to return to the screen displayed in Step , and then press the [
screen.
Connection has failed:

• If it is necessary to specify the subnet mask, gateway, DNS server, or proxy server, see page 3 "How to Specify the Subnet, Gate-
way, DNS Server, and Proxy Server".

] key to return to the initial