Choosing Your Name And Starting Lessons - Alphasmart NEO2 SmartApplet User Manual

C h o o s i n g Y o u r N a m e a n d S t a r t i n g L e s s o n s
The arrows on the
screen show you that
there are more options
above or below the ones
you're viewing.
After you've been added as a student, you can begin working through the
lessons. The first lesson is an introductory overview to teach you how to sit
properly and where to place your hands on the keyboard. The other lessons
help you learn new keys, build speed and accuracy, and test your proficiency.
Students can follow these steps to start work in the KeyWords SmartApplet.
1. After starting KeyWords, use the arrow keys to move the cursor down
next to your name in the list. Then, press enter.
Select your name or choose to add name:
- Teacher options
- Add a student
Luis Camacho
2. Type your password and press enter. (The password was assigned when
you were added as a student.)
3. To start the first lesson, move the cursor next to Start Here! and press
enter.
Select Lesson or Option:
- Student reports
- Start Here!
A S K L Keys
4. Follow the instructions on the NEO screen to learn about the space bar
and enter keys, how to sit properly, and where to put your hands on the
keyboard.
Note: This lesson will refer you to the keyboard picture. You or your
teacher can find this picture in the KeyWords Extras folder on the
AlphaSmart Manager 2 CD. For more about the resources available to
KeyWords teachers, see page 5-45.
K

Choosing Your Name and Starting Lessons

W
E Y O R D S
5-4