Alphasmart NEO2 SmartApplet User Manual page 103

If you choose a file
that is protected by
an individual
password, you will be asked
to enter that password before
you can receive text into the
file. You can enter the
password for the file or the
master password. For more
on password protection, see
page 4-4.
6. Do one of the following to receive the file:
• Press enter if your AlphaSmart device displayed the clipboard
warning and you want to overwrite the data.
• Press esc to cancel receiving the beam.
• If your AlphaSmart device didn't display a clipboard warning, go on to
step 7.
7. Select a file where you want to store the beamed file, either by scrolling
the list and pressing enter, or by pressing one of the file # keys along the
top of the keyboard.
If you're in AlphaWord Plus, you can save to named files that aren't in
workspaces, or save to a new file. If you choose either of these options,
when you start AlphaWord Plus on the receiving device, you'll have to
open the file yourself. (AlphaWord Plus automatically opens a beamed file
if it's stored in a workspace.)
Select a file to store the data to:
- File 1 (27 bytes)
- File 2 (667 bytes)
File 3 (empty)
8. If the file you selected was empty, Beamer places the beamed file in the
empty file.
If the file wasn't empty, choose to overwrite the existing file or to append
the new file to it.
File x is not empty. Choose one:
- Overwrite the file?
- Append to the file?
The beamed data should now be in the file you specified on the receiving
device. To view it, press applets and select AlphaWord Plus. AlphaWord
Plus automatically opens the file it received.
B
E A M E R
Beaming from One NEO to Another
(Press esc key to exit)
6-5