Chapter 3
Removing and Installing Port Adapters
Connecting a PA-2FEISL RJ-45 or SC Cable
Figure 3-3
Connecting PA-2FEISL-FX SC Cables—Horizontal Orientation (Shown Without Handles)
FAST ETHERNET/ISL
Simplex (2)
To repeater
Duplex (1)
To repeater
Only connect cables that comply with EIA/TIA-568 standards.
Caution
Attach the network end of your RJ-45 or SC-type cable to your 100BASE-T transceiver, switch, hub,
Step 2
repeater, DTE, or other external 100BASE-T equipment.
This completes the PA-2FEISL cable installation. Proceed to
Chapter 4, "Configuring the PA-2FEISL,"
to configure the PA-2FEISL and complete the installation.
PA-2FEISL 100BASE-T Fast Ethernet/ISL Port Adapter Installation and Configuration
3-11
OL-3475-02