General Safety Instructions - Siemens SIMATIC CPU 1515SP PC2 F User Manual

Safety information

2.2 General safety instructions

2.2 General safety instructions
Life-endangering voltage when control cabinet is open
If the device is installed in a control cabinet, areas or components can be under life-
endangering voltage when the control cabinet is open.
Contact with these areas or components may lead to death through electric shock.
Switch off the power before opening the control cabinet.
If the device is operated in a machine in accordance with the machinery directive, the
provisions of the guideline 2006/42/EC apply.
Safe operation of a plant
NOTICE
Protective measures
To ensure safe operation of a plant, you have to take suitable IT security measures, for
example, network segmentation.
Seal the cover to protect the CFast card with the operating system of the CPU 1515SP PC2
from unauthorized access.
For more information on Industrial Security, refer to the Internet
(http://www.siemens.com/industrialsecurity).
If you have questions about whether it is permissible to install the device in the planned
environment, please contact your service representative.
Repairs
Damage caused by opening the device
Unauthorized opening of and improper repairs to the device may result in substantial
damage to equipment or endanger the user.
Only authorized personnel are permitted to repair the device.
You can find more information on the repair in the section Sending device in for repair
(Page 63).
14
WARNING
WARNING
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 09/2018, A5E42603425-AA