Wiring Fault; Abnormal Voltage - SurgeX Defender Series User Manual

3.1.2.

Wiring Fault

When connected to an incorrectly wired branch circuit outlet, in addition to the illumination of the Red LED,
the LCD Event Monitor will display the following information:
3.1.3.

Abnormal Voltage

When the magnitude of the branch circuit outlet voltage is not acceptable*, the Surge +
Diagnostic will disconnect power to its outlets and display the following information on the
LCD Event Monitor (*above the over-voltage shutdown threshold or below the under-
voltage shutdown threshold; refer to Section 4: Diagnostic Software for more information):
3.2
© 2013 SurgeX / Electronic Systems Protection, Inc. / Technical Support 800.645.9721 / www.surgex.com /
User Manual
10