Surge + Diagnostic Pc And Driver Installation - SurgeX Defender Series User Manual

Surge protector/power conditioner/ diagnostic software
Hide thumbs Also See for Defender Series:
Table of Contents

Advertisement

2.2 Surge + Diagnostic PC and Driver Installation

Please Note:
 The Surge + Diagnostic unit may be accessed by a PC while
connected to AC power and equipment, or while disconnected from AC power and equipment.
 If accessed by a PC while connected to AC power: For best protection, it is recommended that the power
cord of the computer is plugged into an available receptacle on the Surge + Diagnostic.
Connecting the unit to a PC allows for the availability of the
following features:
Equipment required for PC communication:
a. Plug the USB end of the Data Cable to an available USB port on
b. Automatic Driver Installation (requires Internet connection)
c. Manual Driver Installation
© 2013 SurgeX / Electronic Systems Protection, Inc. / Technical Support 800.645.9721 / www.surgex.com /
Import data stored in the Surge + Diagnostic device memory
Import data from a stored data file
Export data to a data file
Export data to a report in PDF format
Set over and under-voltage shutdown thresholds
Clear device memory
Real-time AC voltmeter
Enhanced Logging Mode
Surge + Diagnostic unit
Data Interface Cable
Diagnostic Software (Revision 2.7, available at www.surgex.com)
PC running Windows XP or later with a USB port and a minimum screen resolution of 1024x768
your PC.
When you plug the USB into your PC, Windows will automatically
detect the cable.
i.
When the "Found New Hardware" pop-up box appears, be
sure to select "Yes, this time only" option for the device driver installation
ii.
This installation could take a few minutes to search and download the driver files.
Once the files are found, follow the on-screen instructions to install.
Please Note: The drivers will first install the USB serial converter, and will then install
iii.
the USB serial port drivers separately
In the event that the automatic driver installation does not function or there is no internet
connection, select "Install Drivers" during software installation.
User Manual
.
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Defender Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents