Table of Contents
Advertisement
Installation
Installation location
A dry, well ventilated room is suitable as an installation
location. The installation location should neither be
exposed to direct sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next to a heat source
is unavoidable, use a suitable insulating plate or observe
the following minimum distances to a heat source:
3 cm to an electric cooker.
30 cm to an oil or solid-fuel cooker.
The floor on which the appliance is to be installed must
be rigid. If required, reinforce the floor.
Observe ambient temperature
and ventilation
The climatic class can be found on the rating plate. It states
the room temperature within which the appliance can be
operated.
Climatic class
SN
N
ST
T
Ventilation
Never cover the ventilation openings in the base panel.
The cooling motor otherwise has to increase its output,
and this increases the electricity consumption.
10
Permitted ambient
temperature
+10 ° C to 32 ° C
+16 ° C to 32 ° C
+16 ° C to 38 ° C
+16 ° C to 43 ° C
Fixing
For secure installation, the appliance screwed
to neighbouring kitchen furniture and/or units.
It is very important therefore that all bordering furniture
and/or units are fixed securely to the floor and/or walls.
If making structural changes fix the appliance in place
again corresponding to the installation instructions.
Installation surface
A load-bearing base is necessary because of the heavy
weight of the fully laden appliance.
The weight of the appliance when fully loaded is approx.
500 kg.
In case of doubt, consult an architect or structural
engineer.
Installing and connecting the appliance
m
Caution!
The appliance should only be installed and connected
by a recognised installation engineer according to the
installation instructions belonging to the appliance.
After installing the appliance, wait at least ½ hour before
switching on the appliance. During transportation the oil in
the compressor may have flowed into the refrigeration
system.
Before switching on the appliance for the first time, clean
the interior of the appliance (see "Cleaning the appliance",
page 19).
Advertisement
Table of Contents
