Selecting The Temperature; Set The Language; Door Alarm - Gaggenau RW 464260AU Operating Instructions Manual

Selecting the temperature

The temperatures in both compartments can be set
independently of each other from +5 °C to +18 °C.
We recommend a setting of +11 ° C.
The temperature setting can be changed using the
–
+ (warmer) or (cooler) setting buttons. The temperature
can be set at 1 ° C intervals.
To set the temperature:
Active the setup mode using the
>
for the upper temperature zone
<
for the lower temperature zone
The corresponding symbol (c / b) is shown.
Set the desired temperature using the + (warmer)
–
or (cooler) setting buttons.
12
< >
or buttons.

Set the language

When the appliance is operated, all messages are
displayed in fascia in English.
Alternatively, the display languages can be selected
corresponding to the table on page 14.
In order to change the display language:
Press setup button
Press the selection button
displayed.
+ –
Press the or setting button, until the desired
language is displayed.
Press the setup-button
settings. The set temperature is displayed again in
the fascia.

Door alarm

If an appliance door is left open, an alarm signal is emitted
after one minute and a corresponding alarm message
appears in the fascia.
Close the door.
Pressing the alarm button
door is not closed properly again, the alarm signal will be
emitted after one minute once more.
W
.
>
, until
ENGLISH
W
, in order to store the
.
switches the signal off. If the
is