Table of Contents
Advertisement
Fascia
O
A
On/off button
Serves to switch the appliance on and off.
m
Caution
The appliance is not seperated from the mains when it is
switched off by pressing the on/off button
.
B
Alarm button
Used to switch off the warning signal.
See section "Door alarm" (page 12).
C
Display panel
The refrigerated zone temperature is displayed on the
fascia. Activated special functions are shown via "symbol".
The menus and setting options which are available are
represented on the fascia in the setup mode.
See section "Setup mode" (page 14).
D
Selection buttons
The temperature setting is activated using the selection
< >
buttons
.
See section "Setting the temperature" (page 12).
For selecting a menu in the setup mode. See section
"Setup mode" (page 14).
/
+
E
Setting buttons
In the temperature setting mode, the temperature
can be changed using the setting buttons
See section "Setting the temperature" (page 12).
For setting the parameters available in the menu.
See section "Setup mode", (page 14).
O
.
< >
–
+/–
.
W
F
Setup button
This button starts and ends the setup mode. If the setup
mode is ended using the setup button
which have been made are stored.
$
G
Holiday button
For switching the energy saving holiday mode on and off.
See section "Holiday mode" (page 17).
A sound can be heard every time a button is actuated
if this function is activated (
during the setup mode.
Symbols in the display.
Display for the upper temperature zone
Display for the lower temperature zone
"Humidity" function is activated,
see page 16.
Holiday mode is activated, see page 17.
For the setting options in the setup mode,
see page 14.
A warning message is displayed,
see page 20.
W
, the changes
) in the sound menu
ON
9
Advertisement
Table of Contents
