Changing The Standard Activated Charcoal Filter - V-ZUG DW-SE series Operating Instructions Manual

... Care and maintenance

Changing the standard activated charcoal filter

Remove the appliance's fuse or switch the circuit breaker off.
Standard activated charcoal filters are only used in the recirculation model.
Standard activated charcoal filters become less effective with use. With nor-
mal use, they have to be changed at least every 4 months or whenever the
indicator light
The dirty standard activated charcoal filter can be disposed of with the
household waste.
A Remove the grease filter and
clean it.
A Turn the two locking knobs A by
90° and remove the standard
activated charcoal filter by pulling
it down.
A
Insert the new standard activated
charcoal filter until it latches at the
back and secure it in the front
with the locking knobs.
A
Reinsert the grease filter.
A Replace the fuse or switch the
circuit breaker back on again.
A
Depress the
3 seconds.
– An acoustic signal sounds.
– The indicator light
18
flashes. They cannot be washed or regenerated.
button for at least
goes out.
˚
90
A
A