... Care and maintenance
Changing the halogen light
Remove the screw fuse or switch off the circuit breaker.
Halogen lights get hot during operation! Allow to cool down first.
A
Using a small screw driver, carefully lever
the ring out.
A
Replace the defective halogen light with a
bulb of the same type (max. 20 watts).
Avoid touching the new halogen
light with bare hands. Use a soft,
dry, grease-free cloth.
A
Clean the ring and the glass.
A
Fit the ring and the glass back into the
openings.
A
Put the screw fuse back in or the switch
circuit breaker on again.
17