End Of Program; Interrupting A Program; Changing The Current Program - Smeg PLA8743X Instruction Manual

EN
2.2.4

End of program

The end of the program is signaled by a short beep and the message "End"
appears on the display (ref. 8 fi g. 2-03). Press any of the program buttons to
cancel "End" from the display and prepare the dishwasher for a new cycle; this
can also be done by opening and closing the door or switching the appliance
off and back on again.
2.2.5

Interrupting a program

To interrupt the current program:
• press the start/pause button (ref. 5 fi g. 2-03) for a few seconds until "Time
to end" shines steady on the display (and a beep is heard). At this point the
cycle can be resumed, by pressing the start/pause button (ref. 5 fi g. 2-03),
changed or cancelled.
2.2.6

Changing the current program

To change the current program:
• interrupt it (see para 2.2.5 "Interrupting a program");
• select a new program (see para 2.2.2 "Selecting a program");
• press the start/pause button (ref. 5 fi g. 2-03) to start the new program.
12
USER INSTRUCTIONS
Rev 0.0