Smeg PLA8743X Instruction Manual page 10

USER INSTRUCTIONS
PROGRAM NUMBER AND
SYMBOL
6 CRYSTAL
7 NORMAL
AUTO
SUPER
WASH
8
ETL
SANITATION
LISTED
EXTREME
WASH
9
ETL
SANITATION
LISTED
(*) see display.
(1) Average water consumption with the softener set to level 0 (zero).
Any other setting will increase water consumption till 2.5 l (0.66 gal.) / cycles with setting 5.
(2) The cycle times listed in the use and care manual are based on normal soil loads and 120°F
(49°C) incoming water and will vary based on your actual conditions.
- Only "AUTO SUPER WASH" and "EXTREME WASH" programmes conforms to NSF std 184 and
are certifi ed by INTERTEK with the ETL SANITATION LISTED.
- When the "AUTO PROGRAMMES" are selected, the dishwasher recognizes the type of dirt and
automatically adjusts the washing parameters as appropriate.
When the "Sani light" (sanitation light) appears on the display, it means that the dishwasher and its
contents have been sanitised according to the requirements of the National Sanitation Foundation
(NSF).
Rev 0.0
DISHES AND PROGRAM
CUTLERY SEQUENCE
Cold pre-wash.
Wash at 45°C
(113°F).
Moderately
Cold rinse.
dirty
Rinse at 69°C
(156.2°F).
Dry.
Cold pre-wash.
Wash at 55°C
(131.00°F).
Moderately
Cold rinse.
dirty
Rinse at 68°C
(154.4°F).
Dry.
Cold pre-wash
(Depending of
Moderately
the type of dirty)
dirty, including
65°C (149°F).
dried-on
Hot rinse at
residue
70°C (158°C).
Dry.
Pre-wash at
45°C (113°F).
Very dirty pans
Wash at 70°C
and dishes,
(158°F).
including
2 cold rinses.
dried-on
Rinse at 70°C
residue
(158°F).
Dry.
TIME CONSUMPTION
WATER ENERGY
MINUTES
(1)
10.8 l
(*) 2.85
gal.
14.8 l
(*) 3.91
gal.
11-15 l
2.91-
(*)
3.96
gal.
18.3 l
(*) 4.83
gal.
Tab. 2-03b
EN
kWh (2)
1.15
0.8
1-1.2
1.12
9