Adjusting The Upper Rack - Smeg PLA8743X Instruction Manual

USER INSTRUCTIONS

Adjusting the upper rack

Version A (see fi g. 4-15): the upper rack can be adjusted in two positions,
according to the user's needs and according to the height of the dishes in the
lower rack. Proceed as follows:
• pull out the right-hand rack guide. Remove the stop (ref. A fi g. 4-15) after
releasing the tabs (ref. B fi g. 4-15) (fi rst release the upper tab and then the
lower one);
• pull out the left-hand rack guide and remove the corresponding stop, just as
you did for the right-hand rack guide;
• remove the rack from the guides;
• fi t the upper or lower pair of wheels (ref. c fi g. 4-15) into the guides, depend-
ing on the setting required;
• return the guide stops to their original positions (ref. d fi g. 4-15) (fi rst attach
the lower tab and then the upper one).
B
A
Rev 0.0
B
C D
Fig. 4-15
EN
31