End Of Program; Interruption A Program; Changing A Program; Annulling A Program - Smeg DWA6214S Instruction Manual

User instructions

END OF PROGRAM

At the end of the program the beeper sounds briefly and
the program lights 4 and 5 (marked "end") flash.

INTERRUPTION A PROGRAM

To interrupt a program in progress:

press the START/PAUSE button (6); the light of the program in
progress remains on (confirmation beep);

you may now restart the program by pressing button (6) again until it
restarts, or change or annul the program (see "C
or "A
NNULLING A PROGRAM

CHANGING A PROGRAM

To change the running program it is necessary:

to interrupt the running program (see "I

select the new program;

start the program (see "S

ANNULLING A PROGRAM

To annul the program, keep the START/PAUSE button (6) pressed until
the program is interrupted (light on and confirmation beep).
Press button (6) again and keep it pressed until the
program lights 4 and 5 (marked "end") come on.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted.
").
NTERRUPTION A PROGRAM
TARTING THE PROGRAM
HANGING A PROGRAM
");
").
",
13