Troubleshooting Minor Problems - Smeg PLA8743X Instruction Manual

USER INSTRUCTIONS
Prolonged disuse
• Run the soak program twice in succession.
• Unplug the power cord from the socket.
• Leave the door slightly open in order to prevent the formation of unpleas-
ant odors inside the washing tank.
• Fill the rinse-aid dispenser.
• Shut off the water supply tap.
Before starting the dishwasher after prolonged disuse
• Check that there are no deposits of sludge or rust inside the water pipe: if
there are, allow the water to run from the water supply tap for a few min-
utes.
• Plug the power cord back into the socket.
• Reconnect the water intake hose and open the tap again .
5.6

Troubleshooting minor problems

In some cases it is possible to remedy minor problems by referring to the fol-
lowing instructions:
If the program fails to start, check that:
• the dishwasher is connected to the electrical power supply;
• there is no power failure;
• the water tap is open;
• the dishwasher door is properly closed.
If water remains inside the dishwasher, check that:
• the drain hose is not kinked
• the drain siphon is not obstructed;
• the dishwasher fi lters are not clogged.
If the dishes do not come out clean, check that:
• the correct amount of detergent has been added;
• there is regenerating salt inside the special container;
• the dishes are being loaded correctly;
• the selected program is suitable for the dish types and their degree of soil-
ing;
• all the fi lters are clean and positioned correctly;
• the spray arm nozzles are not obstructed;
• there is no object obstructing the rotation of the spray arms.
Rev 0.0
EN
39