Total Pump-Out At The End Of The Day; Topping Up With Regenerating Salt (For Models With Softener) - Smeg UD515D Translation Of The Original Instructions

12.3 Total pump-out at the end of the day

The dishwasher is able to perform an automatic cleaning cycle at the end of the day.
Never switch the dishwasher off with water in the tank; always pump out first.

12.4 Topping up with regenerating salt (for models with softener)

Warning: use specific salt only, do not use cooking sea salt. Salt
must be supplied when the led under the symbol indicated in the
left side picture lights up. The salt container has a capacity of about
1 kg of granulated salt.
Correct procedure to refill the regenerating salt:
- start a tank pump-out,
- refill the regenerating salt,
- fill the tank (FILL)
- restart the tank pump-out
- remove any salt residues from the bottom of the tank, as it may
cause corrosion/rust.
This procedure prevents the washing water to enter the salt
container (possible damage to the decalcifier) and that possible
residues of salt are left in the tank (risk of corrosion/rust).
Press the button to start draining the appliance
completely. "UNL" and the duration will appear on the
display.
The indicator L2 becomes blue.
When finished, the dishwasher switches off.
35