Table of Contents
Advertisement
Command Subsystem
ABORt
ARM
:COUNt <number >
:COUNt? [MIN|MAX]
DISPlay
:MONitor:CARD <number>|AUTO
:MONitor:CARD?
:MONitor[:STATe] <mode>
:MONitor[:STATe]?
INITiate
:CONTinuous ON|OFF
:CONTinuous?
[:IMMediate]
OUTPut
:ECLTn[:STATe] ON|OFF|1|0
:ECLTn[:STATe]?
[:EXTernal][:STATe] ON|OFF|1|0
[:EXTernal][:STATe]?
:TTLTrgn[:STATe] ON|OFF|1|0
:TTLTrgn[:STATe]?
[ROUTe:]
CLOSe <channel_list>
CLOSe? <channel_list>
OPEN <channel_list>
OPEN? <channel_list>
SCAN <channel_list>
STATus
:OPERation:CONDition?
:OPERation:ENABle <unmask>
:OPERation:ENABle?
:OPERation[:EVENt]?
:PREset
SYSTem
:CDEScription? <number>
:CPON <number>|ALL
:CTYPe? <number>
:ERRor?
TRIGger
[:IMMediate]
:SOURce BUS
:SOURce ECLTrgn
:SOURce EXTernal
:SOURce HOLD
:SOURce IMMediate
:SOURce TTLTrgn
:SOURce?
90 Relay Driver Module Command Reference
SCPI Command Quick Reference
Abort a scan in progress
Multiple scans per INIT command
Query number of scans
Selects module to be monitored
Query the card number
Selects monitor mode
Query the monitor state
Enables/disables continuous scanning
Queries continuous scan state
Starts a scanning cycle
Enables/disables the specified ECL trigger line
Queries the specified ECL trigger line
Enables/disables command module "Trig Out" port
Queries external state
Enables/disables the specified TTL trigger line
Queries the specified TTL trigger line
Closes channel(s)
Queries channel(s) closed
Opens channel(s)
Queries channel(s) opened
Defines channels for scanning
Returns contents of the Operation Condition Register
Enables events in Operation Event Register to be reported
Returns the unmask value set by the :ENABle command
Returns the contents of the Operation Event Register
Sets Enable Register to 0
Returns description of module in switchbox
Sets specified module to its power-on state
Returns the module type
Returns error number/message
Causes a trigger to occur
Trigger source is *TRG
Trigger source is VXIbus ECL trigger bus line n
Trigger source is "Event In" port on Agilent E1306/E1406
Holds off triggering
Trigger source is the internal triggers
Trigger is the VXIbus TTL trigger bus line n
Queries scan trigger source
Description
Advertisement
Table of Contents
