Example
68 Relay Driver Module Command Reference
Example: Starting a Single Scan
This example enables a single scan of channels 0 through 3 of a single-module
switchbox. The trigger source to advance the scan is immediate (internal) triggering
set with (default) TRIGger:SOURce IMMediate.
SCAN (@100:103)
INIT
!Scan channels 0-3 in card 1
!Begin scan. For 72-channel mode,
close channel 0 (use immediate
triggering). For 36-channel mode, close
channel 0 SET and open channel 0
RESET.