Siemens Simatic ET 200SP User Manual page 12

Properties
The module has the following technical properties:
● Analog input module with 4 inputs
● Resolution: Up to 16 bits including sign
● Limited exchange compatibility with analog input module AI 4xRTD/TC 2-/3-/4-wire HF
(6ES7134-6JD00-0CA1), see section Spare part compatibility (Page 12)
● Voltage measurement type can be set per channel
● Thermocouple (TC) measurement type can be set per channel
● Configurable diagnostics for each channel
● Configurable wire break check per channel
● Hardware interrupt on limit violation can be set per channel (two high and two low limits
per channel)
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
Outlier suppression
Firmware update
Identification data I&M0 to I&M3
Calibration in runtime
Module-internal shared input (MSI)
REAL representation
Scalable measuring range
Configuration in RUN
Value status (PROFINET IO only)
Outlier suppression is always enabled for configuration with the PROFIBUS GSD file. You can set this parameter via
1
data record 128.
You can configure the module with STEP 7 and with a GSD file.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connection
See also
You can find more information on accessories in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Analog input module AI 4xTC HS (6ES7134-6JD00-0DA1)
Manual, 03/2019, A5E42405270-AB
STEP 7
TIA Portal
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
as of V15 with HSP 0265
Product overview
GSD file
PROFINET IO PROFIBUS DP
X
X
X
X
X
X
X
X
X
2.1 Properties
X
1
X
X
X
-
-
-
X
-
11