Siemens Simatic ET 200SP User Manual page 47

Technical specifications
Article number
Interference voltage suppression for f = n x (f1 +/-
1 %), f1 = interference frequency
Series mode interference (peak value of
•
interference < rated value of input range),
min.
Common mode voltage, max.
•
Common mode interference, min.
•
Isochronous mode
Isochronous operation (application synchro-
nized up to terminal)
Interrupts/diagnostics/status information
Diagnostics function
Alarms
Diagnostic alarm
•
Limit value alarm
•
Diagnostic messages
Monitoring the supply voltage
•
Wire-break
•
Group error
•
Overflow/underflow
•
Diagnostics indication LED
Monitoring of the supply voltage (PWR-
•
LED)
Channel status display
•
for channel diagnostics
•
for module diagnostics
•
Potential separation
Potential separation channels
between the channels
•
between the channels and backplane bus
•
between the channels and the power sup-
•
ply of the electronics
Permissible potential difference
between the inputs (UCM)
Isolation
Isolation tested with
46
6ES7134-6JD00-0DA1
70 dB
60 V; DC
90 dB
No
Yes
Yes
Yes; two upper and two lower limit values in each
case
Yes
Yes; channel by channel
Yes
Yes; channel by channel
Yes; green PWR LED
Yes; Green LED
Yes; Red LED
Yes; Green/red LED
No
Yes
Yes
60 V DC
707 V DC (type test)
Analog input module AI 4xTC HS (6ES7134-6JD00-0DA1)
Manual, 03/2019, A5E42405270-AB