Siemens Simatic ET 200SP User Manual page 51

Parameter data records
A.1 Dependencies when configuring with GSD file
Configuring with a PROFINET GSD file
The table lists the properties and their dependencies on the measurement type for
PROFINET.
Table A- 2 Dependencies on the measurement type
Measurement type Scalable
measuring
range
Deactivated *
Voltage –
Thermocouple x
x = property is allowed, – = property is not allowed, * = property is not relevant.
Property is only permitted if the "Wire break check" parameter is enabled.
1
Property is not relevant when "Fixed reference temperature" is used.
2
Configuring with a PROFIBUS GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range for PROFIBUS.
Table A- 3 Dependencies of the measurement type / measuring range
Measurement Measuring
type range
Deactivated *
Voltage ±50 mV, ±80
mV, ±250 mV,
±1 V
Thermocouple Type B, N, E,
R, S, J, L, T,
K, U, C, TXK
x = property is allowed, – = property is not allowed, * = property is not relevant.
Use of "Reference channel of group 0, 1, 2, 3":
1
For each TC channel in the IO device that is intended to use this reference, "Reference junction" must be set to "Refer-
ence channel of group 0, 1, 2, 3".
Property is only allowed if the "Wire break check" is enabled.
2
50
Measuring Wire
range resolu- break
tion check
* *
* -
2 and 3 deci- x
mal places
Slot reference Temperature
junction unit
* *
* *
Internal refer- Degrees Celsi-
ence junction us
Reference Degrees Fahr-
channel of enheit
group 0, 1, 2, 3
1
Kelvin
Fixed reference Degrees Celsi-
temperature us
Degrees Fahr-
enheit
Kelvin
Diagnostics
Underflow Overflow Wire
break
* * *
x x –
x x x
Wire
break
Underflow /
check
overflow
* *
- x
x x
x x
Analog input module AI 4xTC HS (6ES7134-6JD00-0DA1)
Missing Reference
supply junction
voltage
L+
* *
x –
x x
1 2
Diagnostics
Wire Missing Reference
break supply junction
voltage
L+
* * *
– x –
x x x
2
x x *
2
Manual, 03/2019, A5E42405270-AB