Hard Hat - Maxair CAPR User Instructions

24. Hard Hat

Symbol Definitions
!
Warning, Caution, or Note
O.N.
Order Number
!
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replace-
ment or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User's Instructions should use this product.
Failure to follow the User's Instructions, these and in the MAXAIR
Systems User's Instructions, P/N 03521015, may be hazardous to
the user's health.
The institution using this product in any application is responsible
for determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
Page 97 P/N 03521015 Rev Q
O.N. 2061-04A
(01031528)
P/N
Part Number
System or component, be sure to be
Intended Use
The 2061-04A Hard Hat is part of a system intended to filter aerosol-
ized and droplet particulates, and provide head and face protection.
For Use With
The Hard Hat is to be used with the MAXAIR Systems 2083-03
Helmet, the 2264-01 HH Shrouds and/or the 2366-02 HH Cuffs,
alternate Filter Cartridges, alternate Batteries, and an optional ANSI
Z87.1 Lens, per table below.
FACE/HEAD COVER
2261-02ML/SM DLC (Disposable
Lens-Cuff) SHROUDS
2366-01ML/SM DLC
(Disposable Lens-Cuffs)
CUFFS
Standard HH-CAPR-36 System with 2061-04A Hard
Hat and 2167-10 Filter Cartridge
1
4
1. 2061-04A Hard Hat w/2071-03
Liner
2. 2167-03 Filter Cartridge
3. 2081-03 Helmet w/o Cage
Alternate Face Seals and Batteries, and optional
Lens
2264-01 2366-01
DLC Shroud DLC Cuff
Specifications
Temperature Limits: 49 C
0
Materials
Hard Hat is Kevlar, reinforced
Regulatory
●NIOSH ●ANSI/ISEA Z98.1-2014 Type 1, Class G & C
FILTER
APF
CARTRIDGE
2167-10
1,000
2166-10
2167-10
25
2166-10
2
3
5 6
4. 2500-36TSC Li-Ion Battery
5. 2000-76 Battery Belt
6. 2600-01 Battery Charger
2400-090L
2500-30TSC
Impact Lens
Li-Ion Battery