Maxair CAPR User Instructions page 31

Hide thumbs Also See for CAPR:
Table of Contents

Advertisement

9 Side Adjustment Straps with Snaps
to accommodate different head sizes and ensure convenient viewing of the LED Safety Status Indicators. Secure into desired
position by snapping against post/stud. Both sides are to be in the same hole position.
10 Rear Liner Pads
Accessories.
11 Rear Headband Comfort Pad
via Hook and Loop, and removable. For replacement, refer to Section 29.
12 Rear snaps for Liner
13 Liner Headband Ratched Knob
14 Helmet Label
- PN, O.N. and SN identification. Refer to symbol definition chart for further details.
15 TurnLock Power Cord Connector
16 Liner Power Cord Slot
17 Airflow Controller
CAUTION
The Air Flow Switch is user adjustable to match the amount of air flow with the user's activity level and breathing
requirements.
CAPR Helmets are equipped with a switch which adjusts the operating airflow. When the Helmet is first turned on it will start at a
low level, then the airflow will increase to a preset point according to the switch position.
NOTE
When the Helmet is initially connected to the Battery, all five LED Safety Status Indicators are lighted briefly indicating
all are functional. The red and yellow LEDs will turn off and the airflow increases to the appropriate operating level based on the
Air Flow Switch position. The green LEDs will be on as appropriate to the battery charge level as indicated in the LED Safety
Status Indicators table (previous page).
Low
Air Flow in Liters Per Minute
190
18 Power Cord
- Battery to Helmet Connection. For replacement, refer to Section 24, Helmets and Helmet Accessories.
Page 31
P/N 03521015 Rev Q
- Height adjustment. Four holes represent four possible height adjustments
- Provide cushion for comfort. Attached via adhesive. For replacement refer to Section 29,
Provides cushion for comfort and sizing for very small head sizes. Attached
-
- For mounting LIner to Helmet
- Head circumference adjustment knob.
- Easy and secure attachement and removal of Power Cord to/from Helmet.
- Allows removal and attachment of Liner without removaing Power Cord
- Allows user to select range of air flow to me work activity and personal comfort
Air Flow Switch Position
Med
215
High
240
NOTE
The flow levels, in liters per
minute, are only approximate.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents