Double Xp Hfr Hoods With Heavy Loading Filter (Hlf) And Optional Hfr Fcc - Maxair CAPR User Instructions

23. Double XP HFR Hoods with Heavy Loading Filter (HLF) and
optional HFR FCC
Symbol Definitions
!
Warning, Caution, or Note
!
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User's Instructions should use this product.
Failure to follow the User's Instructions, these and in the MAXAIR
Systems User's Instructions, P/N 03521015, may be hazardous to
the user's health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recom-
mend the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open flame.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
Page 93 P/N 03521015 Rev Q
O.N. 2272PW-07SM
(Small-Medium)
P/N 07831025
O.N. 2272PW-07ML
(Medium-Large)
P/N 07831201
*one 2170-27 (07831205) HLF
is included with each Hood
O.N.
Order Number
System or component, be sure to be
Intended Use
The MAXAIR CAPR Hood Systems are intended to filter
® ®
aerosolized and droplet particulates and provide high level fluid
resistance.
Hoods are designed for single use applications.
Typical Hood System Components
2
1
3
B
A
C
1 The 2500-30TSC is an alternate to the 2500-37TSC.
Hood Specifications
Temperature Limits: 49 C maximum
0
Materials:
MATERIAL TYPE
Body (Shroud) Polypropylene
Lens Polycarbonate
Hood Filter Polypropylene
HLF Polypropylene/
modacrylic blend
Regulatory
NIOSH
O.N. 2272PB-07SM
(Small-Medium)
P/N 07831173
O.N. 2272PB-07ML
(Medium-Large)
P/N 07831202
*one 2170-27 (07831205) HLF
is included with each Hood
4
1. 2081-03 Helmet
2. 2061-05 HFR FCC
6
3. 2272PW-07 Hood w/
2170-27 HLF
4. 2500-37TSC Battery
5
5. 2000-76 Battery Belt
6. 2600-01 Battery
Charger
A. 2081-03 Helmet
D
B. 2061-05 HFR FCC
F
C. 2272PB-07 Hood w/
2170-27 HLF
D. 2500-37TSC Battery
E
E. 2000-76 Battery Belt
F. 2600-01 Battery
Charger
FLUID RESISTANCE
ASTM F1671
ASTM F1671
AATCC TM127
General particle filter
material
1
1