Maxair CAPR User Instructions page 102

Assembly - ChinStrap to Hard Hat Skirt
A
A. Grasp one side ChinStrap Hook at its base where the strap attaches.
B. Place tip of the forefinger against back of Hook.
C. Press Hook on to Hard Hat Skirt Silver Rivet until it (audible) clicks in
place, securely.
D. Repeat for other ChinStrap Hook on to other side Hard Hat Skirt Rivet.
Assembly - Connect ChinStrap Buckle
1. Securely grasp the female buckle in one
hand and the male buckle in the other.
Dis-Assembly - Dis-Connect ChinStrap Buckle
1. Securely grasp the female
buckle in one hand and the male
buckle in the other.
Adjust the ChinStrap Length
1. Disconnect the buckle and place the
male buckle at right angle to the straps.
Page 102 P/N 03521015 Rev Q
B
C
2. Depress the spring locks on
the female buckle with the
thumb and forefinger.
2. Shorten: Hold the male buckle firmly in one
hand, grasp the non-Hook strap-end and pull.
Dis-Assembly - ChinStrap off of Hard Hat Skirt
A. Grasp one side ChinStrap Hook base between thumb and
forefinger.
B. Using force from the thumb, push Hook off Hard Hat Skirt
Rivet.
C. Repeat for other ChinStrap Hook on other Helmet side.
2. Insert the male buckle
into the female buckle.
3. Pull the female and male buckle halves apart.
A
B
3. Press the buckles together until the audible
click indicates they are securely connected.
3. Lengthen: Hold the male buckle firmly in one
hand, grasp the Hook strap-end and pull.