Adjust Your Speaker Feedback (Y-Cable Only) - Cisco 521 User Manual

Adjust Your Speaker Feedback (Y-Cable Only)

Procedure
Step 1
Press Applications
Step 2 Select Accessories > Cisco Headset.
Step 3
Select Speaker > Sidetone.
Step 4 Press the Navigation cluster, up or down, to adjust the sidetone.
Step 5
Select Set to apply your settings.
Adjust Your Speaker Feedback (Y-Cable Only)
If you use the Y-cable to connect with a Cisco Headset 561 or 562 base, you can adjust how much of your
own voice you want to hear through the headset.
Procedure
Step 1
Press Applications
Step 2 Select Settings > Headset sidetone.
Step 3
Press the Navigation cluster, up or down, to adjust the sidetone.
Step 4 Select Exit to apply the setting.
Adjust Your Microphone Volume (USB only)
You can adjust how loud you sound through your headset microphone when you use a USB connection. You
may wish to adjust this setting depending your surrounding ambient noise level.
Procedure
Step 1
Press Applications
Step 2 Select Accessories > Cisco Headset.
Step 3
Press Setup and select Microphone > Gain.
Step 4 Press the Navigation cluster, left or right, to adjust the gain.
Test Your Microphone (USB Only)
You can test your microphone to hear how you sound through your headset when you use a USB connection.
Cisco Headset 500 Series User Guide
22
.
.
.
Headset Settings