Cisco 521 User Manual page 14

Cisco Headset 560 Series Multibase
• USB to USB Cable: for Cisco IP Phones with USB connectivity
• USB Y-Cable: for Cisco IP Phones without a USB port
• Mini USB Cable: for PC or Mac.
Figure 5: Multibase LEDs
The following table describes the multibase.
Table 8: Multibase LEDs
Number
1
Cisco Headset 500 Series User Guide
8
Note Your Cisco IP Phone administrator must enable hookswitch calling for the Y-Cable
to work.
Name
Battery Status LED
Description
Indicates the headset battery charge and base status:
• Headset battery strength—LEDs blink and change to
solid as the battery charges.
• Headset update in progress—LEDs blink in sequence,
left to right.
• Headset and base not paired—All LEDs blink
• Power save mode—Middle LED shows solid.
The base enters power save mode when there is no call source
connectivity after 10 minutes.
Your Headset