Connect The Multibase To A Bluetooth Device; Turn Bluetooth On And Off With The Multibase; Change The Bluetooth Device Connected To Your Multibase - Cisco 521 User Manual

Your Headset
Base Icon
Related Topics

Connect the Multibase to a Bluetooth Device

The Cisco Headset 560 Series with Multibase can connect to Bluetooth devices such as a mobile phone or
tablet. The headset base appears on your call device as Cisco Headset followed by the last three digits on
your headset serial number.
Note You can find your headset serial number in the lower right corner on the underside of your base.
Procedure
Step 1 Press the Bluetooth button on the back of the multibase twice to start pairing.
Step 2
Select your headset from the Settings menu on your device.
The Bluetooth LED lights white when pairing is successful.

Turn Bluetooth On and Off with the Multibase

Your multibase remembers the last-connected device. When you turn Bluetooth off on the multibase, the
connection to the device stops. When you turn Bluetooth on again, the base reconnects to the device.
Procedure
Press the Bluetooth button on the back of the base once to turn it on or off.

Change the Bluetooth Device Connected to Your Multibase

The multibase only remembers one Bluetooth device at a time.
Connect the Multibase to a Bluetooth
Connection
The mobile phone icon corresponds with the Bluetooth connection found
at the back of the base. While the icon is of a mobile phone, the base
will connect with any compatible Bluetooth call device.
If you are listening to music through the Bluetooth source, the music
pauses when you place the headset on the base.
Device, on page 11
Cisco Headset 500 Series User Guide
Connect the Multibase to a Bluetooth Device
11