Getting started
Adding and registering a handset
To register a handset to a MS2015 deskset
1.
Make sure the cordless handset is out of the charger and the screen
shows Choose Handset in Registration at base menu. And put handset
on cradle to register.
2.
On the MS2015 deskset, press MENU
3.
Scroll down to Registration and press
4.
Press
SELECT again to select Handset. The MS2015 deskset screen
MENU/
shows Registering handset... (Put handset on cradle to start).
5.
Place the unregistered handset into the charger. The handset beeps once
and begins registering to the MS2015 deskset. It takes up to
to complete the registration. There is a beep sound when the registration
is successful. The MS2015 deskset shows Handset registered and then the
handset shows EXT XX (X represents the extension number).
NOTES:
•
If the registration is not successful, the deskset screen displays Registration failed with an
error tone. To reset the handset, remove the handset from the charger. Try the registration
process again.
•
Make sure to remove all unregistered system handsets or cordless headset from the charger
before registering a new handset.
/SELECT.
SELECT.
MENU/
9
60 seconds