Ap: / Unit-X / Port-Y, Configuration - General - ABB FOX61 Series User Manual

F O X C S T R E F E R E N C E
8.3.3.1

AP: / unit-x / port-y, Configuration - General

Operation Name Parameter Name Range
Termination Mode
Switching Bidirectional
36
Table 10: AP: / unit-x / port-y, Configuration - General
Transparent
Clock Master
PCM30
PCM30C
PCM31
PCM31C
V5 Uplink
V5 Uplink NCI


Description / Details
Clock and data transparent.
Unstructured 2048 kbit/s signal.
Transparent data, clock locked to PETS.
Unstructured 2048 kbit/s signal.
Terminated with CAS, without CRC4.
ITU-T G.704 structured 2048 kbit/s signal.
Terminated with CAS and CRC4.
ITU-T G.704 structured 2048 kbit/s signal.
Terminated without CAS or CRC4.
ITU-T G.704 structured 2048 kbit/s signal.
Terminated without CAS, with CRC4.
ITU-T G.704 structured 2048 kbit/s signal.
Transport mode for V5 links.
The 5 Sa bits (timeslot 0, spare bits Sa4 ... Sa8)
support V5.x applications.
This uplink uses CRC4.
Transport mode for V5 links.
The 5 Sa bits (timeslot 0, spare bits Sa4 ... Sa8)
support V5.x applications.
This uplink does not offer CRC4.
In the bidirectional mode the path selector is
controlled by the failure state of the working and
the protecting paths and by the remote selector
state. In the bidirectional switching mode the
local and the remote path selectors are synchro-
nised to select both the same path, i.e. both
select the working path or both select the pro-
tecting path.
refer to "1KHW002467 FOX61x TDM
Please
Services"
for a description of the switching crite-
ria.
In the unidirectional mode the path selector is
controlled by the failure state of the working and
the protecting paths.

FOX61x LEDE1